VIKTEC TOOL SOLUTIONS
Menu

Automotive Hand Tools

Select automotive hand tools by repair task and full model reference. Listings 1–36 of 153.

Choosing tools for this range

Match the drive size, fastener profile and reach to the job. Check the sizes supplied when comparing sets.

Open VIKTEC VT14196P 1/2 inch drive torque wrench with reversible ratchet head, blue adjustment handle, extension handle and molded storage case, rated from 65 to 350 N·m.
VT14196P · 1/2in Drive Torque Wrench 65–350N·m (provisional range)

Repair applications

Compare selected listings

ModelPublished application notesModel data
VT14196P · 1/2in Drive Torque Wrench 65–350N·m (provisional range)Use VT14196P for controlled tightening of wheel fasteners, suspension components, engine fasteners and other compatible automotive or mechanical assemblies requiring a specified torque. Check required tightening torque, adjustment range and square drive before ordering.Reference sheet
VT01785 · Fuel Line Quick Disconnect Pliers for Automotive Fuel System ServiceUse VT01785 for disconnecting quick-connect fuel line fittings on passenger cars, SUVs and light commercial vehicles during fuel system service and maintenance. Check fuel line diameter and connector release profile before ordering.Reference sheet
VT07045 · 12PC Heavy Duty Chrome Vanadium Screwdriver SetUse VT07045 for professional and general workshop applications including automotive repair, machinery maintenance and assembly work. Check fastener recess, tip size and usable shaft length before ordering.Reference sheet
Open these listings in the comparison tool →
Check the original VIKTEC range How to verify a model suffix Procurement FAQ All product families

All product listings

153 product listings

Open VIKTEC VT14196P 1/2 inch drive torque wrench with reversible ratchet head, blue adjustment handle, extension handle and molded storage case, rated from 65 to 350 N·m.VT14196P · 1/2in Drive Torque Wrench 65–350N·m (provisional range)Use VT14196P for controlled tightening of wheel fasteners, suspension components, engine fasteners and other compatible automotive or mechanical assemblies requiring a specified torque. Check required tightening torque, adjustment range and square drive before ordering.VIKTEC long-reach fuel line pliers with hooked jaws and red-and-black comfort handles for disconnecting automotive fuel line fittings.VT01785 · Fuel Line Quick Disconnect Pliers for Automotive Fuel System ServiceUse VT01785 for disconnecting quick-connect fuel line fittings on passenger cars, SUVs and light commercial vehicles during fuel system service and maintenance. Check fuel line diameter and connector release profile before ordering.Open VIKTEC 12-piece heavy-duty screwdriver set with slotted and Phillips screwdrivers arranged in a molded carrying case.VT07045 · 12PC Heavy Duty Chrome Vanadium Screwdriver SetUse VT07045 for professional and general workshop applications including automotive repair, machinery maintenance and assembly work. Check fastener recess, tip size and usable shaft length before ordering.Open VIKTEC 7-piece manual impact driver set with Phillips and slotted bits in a compact molded storage case.VT13045 · 7PC Impact Screwdriver Set for Removing Seized ScrewsUse VT13045 for loosening and tightening seized, rusted or over-tightened screws during automotive, motorcycle and general mechanical repair applications. Check fastener recess, tip size and usable shaft length before ordering.Open VIKTEC 8-piece 1/2-inch drive spline impact socket bit set with M5 to M16 sizes in a molded storage case.VT13101B · 1/2″ Drive M-Type Impact Socket Set for Automotive ServiceUse VT13101B for removing and installing wheel nuts, axle nuts and other high-torque fasteners on passenger cars and light commercial vehicles. Suitable for use with impact wrenches and manual tools. Check fastener profile, drive size and required reach before ordering.VIKTEC universal drum brake spring washer pliers with shaped jaws, return spring and red-coated handles.VT17706 · Universal Drum Brake Spring Washer Pliers for Brake ServiceUse VT17706 for removing and installing brake shoe retaining spring washers and hold-down pins during drum brake service on passenger cars and light commercial vehicles. Check jaw profile, opening range and access around the part before ordering.VIKTEC 9-piece scraper, hook and pick tool kit with assorted straight, angled and curved tips and non-slip handles.VT01118 · Hook and Pick Screwdriver Set for O-Ring and Seal RemovalUse VT01118 for removing O-rings, oil seals, retaining clips, springs, gaskets and other small components during automotive, mechanical and general maintenance applications. Check fastener recess, tip size and usable shaft length before ordering.Open VIKTEC 8-piece impact socket adaptor and reducer set with multiple square-drive sizes arranged in a compact molded case.VT13098 · Impact Socket Adapter Set with 1/4 3/8 1/2 3/4 1 Inch Drive AdaptersUse VT13098 for converting different drive sizes between sockets, ratchets, torque wrenches and power tools in automotive and industrial applications. Check fastener profile, drive size and required reach before ordering.VIKTEC 1/4-inch drive reversible ratchet wrench with quick-release head and green-and-black non-slip comfort handle.VT13113B · 1/4″ Rotating Handle Socket Ratchet Wrench for Automotive RepairUse VT13113B for automotive repair, mechanical assembly and general maintenance applications requiring efficient fastening and loosening operations. Check the square drive, handle length and available swing angle before ordering.VIKTEC flexible magnetic pick-up tool with LED light, blue handle and bendable metal shaft for retrieving parts up to 8 lb.VT01204 · 8LBS Flexible Magnetic Pick Up Tool with LEDUse VT01204 for retrieving steel and iron objects from hard-to-reach areas in automotive repair, workshops and maintenance applications. Check reach, head diameter and the weight of the part to be retrieved before ordering.Open VIKTEC 15-piece 3/8-inch drive metric crowfoot wrench set with sizes from 8mm to 26mm in a molded carrying case.VT14069 · 15PC 3/8in Drive Metric Crowfoot Wrench SetUse VT14069 for tightening and loosening metric fasteners in confined or obstructed areas where conventional sockets and spanners cannot be used during automotive and mechanical repair. Check fitting size, wrench profile and access around the line before ordering.Open VIKTEC 3-piece 1/2-inch drive hub nut impact socket set with 30mm, 32mm and 36mm CR-MO deep sockets.VT13206 · 3PC 1/2in Drive Thin-Wall Impact Hub Nut Socket SetUse VT13206 for removing and installing compatible 12-point front hub nuts on modern passenger cars and selected light commercial vehicles, especially where access is restricted. Check fastener profile, drive size and required reach before ordering.Open VIKTEC 9-piece hose clamp removal pliers set with flexible cable pliers and assorted clamp tools in a molded carrying case.VT01068 · Hose Clamp Pliers Set for Automotive Cooling System ServiceUse VT01068 for removing and installing spring hose clamps on radiator hoses, heater hoses, fuel hoses and vacuum hoses during automotive maintenance and repair applications. Check clip type, clamp diameter and access around the hose before ordering.VIKTEC CV joint boot and hose clamp pliers with winding spindle and red handle for installing and tightening metal band clamps.VT01148 · CV Boot Clamp Pliers for Ear-Type Clamp InstallationUse VT01148 for installing and tightening ear-type clamps on CV joint boots during driveline repair and maintenance. Suitable for CV axle boot replacement and other ear clamp applications. Check jaw profile, opening range and access around the part before ordering.Open VIKTEC 6-piece impact socket adapter and reducer set with drive conversions from 1/4 inch to 3/4 inch in a molded storage case.VT01619 · 6PC Air Hammer Chisel Set for Pneumatic Repair ToolsUse VT01619 for cutting, chiseling, separating and surface preparation during automotive body repair, exhaust service and general mechanical maintenance. Compatible with standard air hammer tools. Check repair area, attachment type and access to the panel before ordering.VIKTEC 5-liter translucent oil and fuel measuring jug with molded handle, secure lid and flexible pouring spout.VT13778 · 2PC CV Boot Clamp Pliers & Banding Tool SetUse VT13778 for installing and securing strap-style and ear-type clamps on CV joint boots during driveshaft, axle and constant-velocity joint maintenance. Check jaw profile, opening range and access around the part before ordering.Open VIKTEC 8-piece 1/2-inch drive hex impact socket bit set with H5, H6, H8, H10, H12, H14, H17 and H19 sizes.VT13101 · 8PC 1/2 Inch Impact Hex Bit Socket SetUse VT13101 for professional fastening and removal applications using impact tools, ratchets and torque equipment. Check fastener profile, drive size and required reach before ordering.VT13114 · 3/8 Drive Extendable Ratchet WrenchVT13114 · 3/8 Drive Extendable Ratchet WrenchUse VT13114 for automotive repair, machinery maintenance and general workshop fastening applications. Check the square drive, handle length and available swing angle before ordering.Open case containing 10 VIKTEC 1/2 inch drive deep impact sockets in metric sizes from 10 to 24 mmVT13337 · 10PC Metric Impact Deep Socket Set 10–24mmUse VT13337 for tightening and loosening recessed metric fasteners, extended studs and deeply positioned nuts during automotive, mechanical and workshop repair applications. Check fastener profile, drive size and required reach before ordering.Open case containing 16 VIKTEC 1/2-inch drive metric deep impact sockets with a black protective finish.VT14108 · 16PC 1/2in Drive 6-Point Impact Deep Socket SetUse VT14108 for tightening and loosening recessed metric fasteners, deep-positioned nuts and extended studs during automotive, mechanical and professional workshop repair applications. Check fastener profile, drive size and required reach before ordering.VIKTEC VT01161B 2PC Hose Clamp Pliers SetVT01161B · 2PC Hose Clamp Pliers Set for Automotive Hose Clamp RemovalUse VT01161B for removing and installing spring hose clamps on radiator hoses, fuel lines, coolant hoses, vacuum hoses and other flexible automotive tubing during vehicle maintenance and repair. Check clip type, clamp diameter and access around the hose before ordering.VIKTEC hose clamp pliers set with flexible cable for removing automotive hose clampsVT01164 · U-Type Hose Clamp Pliers for Automotive Spring Hose ClampsUse VT01164 for removing and installing U-type spring hose clamps on radiator hoses, coolant hoses, fuel lines and vacuum hoses during automotive repair and maintenance. Check clip type, clamp diameter and access around the hose before ordering.VT13093 · 40PC Torx Hex Spline Bit Socket Adapter SetVT13093 · 40PC Torx Hex Spline Bit Socket Adapter SetUse VT13093 for automotive repair, mechanical maintenance and general fastening applications requiring Torx, Hex and Spline bit sockets. Check fastener profile, drive size and required reach before ordering.VIKTEC fuel line disconnect tool kit for quick removal of automotive fuel and hose connectionsVT13394 · 19PC XZN Triple Square Spline Bit Socket SetUse VT13394 for automotive repair and mechanical applications requiring XZN triple square spline, E-Torx and Torx fastener service. Check fastener profile, drive size and required reach before ordering.VIKTEC hose clamp pliers set with flexible cable for removing automotive hose clampsVT13492B · Pipe Bending Pliers 4.7-9.5mm Copper Tube ToolUse VT13492B for bending copper, metal and aluminum pipes in automotive, refrigeration and general maintenance applications. Check jaw profile, opening range and access around the part before ordering.VIKTEC deep impact socket set with storage case for professional automotive repair and maintenanceVT14133B · 13PC 1/2in Impact Deep Socket Set 13–32mmUse VT14133B for tightening and loosening recessed metric fasteners, extended studs and deep-positioned nuts during automotive, mechanical and professional workshop repair applications. Check fastener profile, drive size and required reach before ordering.VIKTEC VT01171 flexible cable hose clamp pliers with locking mechanism for removing spring hose clamps in confined areasVT01171 · Remote Action Hose Clip Plier with Flexible CableUse VT01171 for removing and installing flat-type hose clamps located in difficult-to-access areas. Check clip type, clamp diameter and access around the hose before ordering.VIKTEC 21-piece locking wheel nut removal socket set with multiple spline profiles in carrying caseVT13883 · 21PC 1/2″ Drive Metric Socket Set 8-36mm CR-VUse VT13883 for automotive repair, mechanical maintenance and general fastening applications. Check fastener profile, drive size and required reach before ordering.VIKTEC 108PC 1/4 and 1/2 inch drive socket and ratchet tool set for professional automotive repair and maintenanceVT13127 · 108PC 1/4″ & 1/2″ Drive Socket and Hand Tool SetUse VT13127 for automotive repair, mechanical maintenance, assembly and general fastening applications. Check fastener profile, drive size and required reach before ordering.VIKTEC 6PC 1/2 inch drive spline impact socket set for automotive repair and heavy duty fastener removalVT13097 · 6PC 1/2in Drive Spline Impact Socket Bit Set M14–M18Use VT13097 for removal and adjustment of hubs, steering and suspension components on selected VAG vehicles. Check fastener profile, drive size and required reach before ordering.VIKTEC CLIC-R hose clamp pliers for removing and installing Clic and Clic-R type clamps on automotive hoses and CV bootsVT01165 · CV Boot Clamp Pliers for Drive Shaft Boot InstallationUse VT01165 for securing and crimping metal clamps on CV joint boots during drive shaft, CV joint and boot replacement service. Check jaw profile, opening range and access around the part before ordering.VIKTEC M10S Polydrive long socket tool for removing and installing cylinder head bolts on VW and Audi enginesVT01847 · VW Audi 1/2″ Drive M10 Gear Shaft SocketUse VT01847 for servicing compatible gear shaft fasteners on Volkswagen and Audi vehicles during transmission and drivetrain repair. Check fastener profile, drive size and required reach before ordering.VIKTEC automotive hose clamp pliers with locking handle and extended jaws for removing and installing spring hose clamps on coolant fuel and radiator hosesVT01161E · 430mm Double Joint Hose Clamp PliersUse VT01161E for removing and installing low-lying or hard-to-reach hose clamps in automotive cooling, fuel and hose systems. Check clip type, clamp diameter and access around the hose before ordering.VIKTEC angled hose clamp pliers with swivel jaws for removing and installing automotive ring type and spring hose clamps in confined areasVT01161C · Flexible Hose Clamp Pliers for Automotive Hose ServiceUse VT01161C for removing and installing compatible spring-type hose clamps in automotive cooling, heating and fluid hose systems, especially in confined or difficult-to-reach areas. Check clip type, clamp diameter and access around the hose before ordering.VIKTEC 12PC heavy duty impact socket set with large size sockets supplied in a metal storage case for automotive and truck repairVT18997 · 12PC 1″ Drive SAE 6-Point Impact Socket Set 2-1/8″–3-1/2″Use VT18997 for automotive, truck, heavy-duty vehicle and mechanical repair applications requiring high-torque fastening. Check fastener profile, drive size and required reach before ordering.VIKTEC 22mm 16 point central valve socket for removing and installing VANOS and VCT central valves on BMW Ford and MINI enginesVT18615 · 16PT 22x30mm Central Valve Socket for BMW Ford MINIUse VT18615 for servicing the central screw connection on the central valve of camshaft position adjusters in VANOS and VCT systems on selected BMW, Ford and MINI vehicles. Check fastener profile, drive size and required reach before ordering.

Repair applications

Cooling system service Injector and glow plug service Torque and angle measurement