VIKTEC TOOL SOLUTIONS
Menu

How to verify a tool model suffix before ordering

Check the complete part number against the model page, kit contents and document revision before selecting a configuration.

Verify the model suffix: Copy the full part number, Match contents to the source, Confirm revision and repair task.

Copy the complete VIKTEC reference, including its final letters and digits. A shared prefix helps you find candidates. It does not establish that two kits contain the same components or fit the same vehicle.

Open the source linked on the product page and compare the full number, kit contents and vehicle or engine information. Check the model document register for an approved revision. If the suffix differs or the document is unavailable, ask VIKTEC to confirm the specific configuration.

For a timing job, include the engine code, timing drive, year and planned repair. For a brake-line repair, include pipe diameter, material and flare type. For a cooling-system tool, identify the cap or adapter and whether you need pressure testing or vacuum filling.

When should two references stay separate?

Keep separate inquiry lines for different suffixes until the source document confirms their contents and intended repair. Attach the reference you found and identify the difference you need checked.

Prepare your technical request

Repair applications

VIKTEC cooling system pressure tester and vacuum refill tool kit with hand pump, pressure gauge, hoses and radiator cap adapters in a carrying caseCooling system serviceDefine the cooling service before sourcing tools.VT13995 brake pipe flaring tool and accessories in an open black carrying case with a green latch.Brake pipe flaringSelect an on-car or bench tool for the pipe and flare you need.

Related products

VIKTEC cooling system pressure tester and vacuum refill tool kit with hand pump, pressure gauge, hoses and radiator cap adapters in a carrying caseVT01064C · 28PC Cooling System Pressure Tester And Vacuum Refill KitVT01064C is a 28-piece cooling-system pressure-testing and vacuum-refill kit. Confirm the vehicle connection, radiator-cap adapter and service procedure for the intended test or refill task. The published gauge scale is 0–35 psi (0–2.5 bar); follow the vehicle-specific service limits.VT13995 brake pipe flaring tool and accessories in an open black carrying case with a green latch.VT13995 · 4.75 mm (3/16 in) SAE Double Flaring Tool for Brake LinesVT13995 forms SAE double flares on 4.75 mm (3/16 in) brake line. Check the specified tubing material, fitting and flare profile before selecting the tool. Matching diameter alone does not confirm suitability for another flare type or repair procedure.
Discuss How to verify a tool model suffix before ordering